   
WoodWrite,Ltd. Model 462 Mini-Lathe
KT-462 $3,990.00 with PC, $3,490 without PC
 We haven’t quite figured out how to sand and polish your
parts automatically, but every other operation in turning your small parts is automatic
when using the brand new WoodWrite, Ltd. Model 462 CNC (Computer
Numerically Controlled) lathe. We’ll even furnish the Pentium based
computer, already
loaded with the software to make every pen and pencil we sell, plus some other unique wood
parts which you will find are fun and profitable to make. Load the wood onto the lathe,
set the zero points with a few clicks of the mouse, start the spindle motor and walk away.
Your pen and pencil barrels will be turned perfectly each and every time. You’ll be
amazed as the program in the computer moves the tool back and forth, in and out, at the
proper speed, cutting parts consistently time after time, exactly to size. Want to turn
parts other than those for which we have included the software? With a little practice,
you can write your own program or send us a line drawing or a sample part, and we’ll
write the program for you. In a short time, we’ll send you a disk to load into your
computer plus a sample part made from your drawing or sample. As usual, you’ll
receive our famous WoodWrite, Ltd. service, second to none.
 | overall length = 29" (74 cm) |
| depth = 16" (41 cm) |
| weight = 33 lbs. (14 k) |
| tail stock includes a high speed live center with radial needle bearing
and ball thruster, and easy-release knob |
| 16.5" (42 cm) between centers |
| 2" high-speed ball bearings rated at over 35,000 rpm |
| 5.5" (14 cm) swing over bed |
| 2.5" (6.3 cm) swing over saddle |
| saddle moves on two polished and ground tool steel rods |
| slide includes 4 bronze, self-lubricating Oilite bushings |
| 1/4" jeweler's precision collet and collet closer nut on 3/4-16 drive
spindle, for greater precision and accuracy in turning |
| 1/3hp A/C induction motor |
| two six-step pulleys and long-life belt (speed range 450 - 5700 rpm) |
| the lathe of anondized 6061-T6 aircraft grade aluminum extrusions
with a bed of double 3/4" precision ground tool steel rods is
assembled, aligned and mounted on a 3/4" wood base, pre-drilled for easy mounting to your work bench (screws provided) |
| the rear tool mount, with furnished carbide tipped cutting tool allows
full access for sanding and polishing |
| exclusive dust collection manifold accepts standard 2-1/4" shop vac
hose and follows the cutting tool for 99% efficiency |
| Pentium based PC to control the lathe, pre-loaded with all the software
required to make all WoodWrite, Ltd. pen/pencil styles, plus many other
patterns. |
| two Servo motors control longitudinal feed plus position of cutting tool
|
| all WoodWrite, Ltd. mandrels are included - each secures
into a 1/4" collet which is far more accurate than a Morse taper system or
Jacob’s Chuck |
|
allowance made if you do not need the PC and/or if you are upgrading a
Model 362 series lathe. Call now for details
[ Model 162 ] [ Model 363 ] [ Model 462 ] [ Custom Lathes ] |
|
Our
new address is 979 York Street, Hanover, PA 17331. Phone 717-646-0102. Fax
717-646-0104.
