wwnavbar.JPG (31909 bytes)Our new address is 979 York Street, Hanover, PA 17331. Phone 717-646-0102. Fax 717-646-0104.

Duplicators Mandrels/Bushings Collets/Chucks


A full line of lathe accessories for all your turning needs.

With our Copy-Cat Duplicator, you can easily turn any curved pen, pencil or other design without hand held tools! We now have pattern clamps available for use with other manufacturer's patterns!

We also have a mandrel to fit each of our pen kits, and collets and chucks for free hand turning.

Other accessories

Unless otherwise noted, all of the following lathe accessories may be used with any model of WoodWrite, Ltd. mini-lathe.

Drive Belt

 long lasting drive belt KT-03 $6.95

Tool

 carbide tipped cutting tool KT-04 $5.95

Fuses

 package of 10 for Model 362 lathes - not needed for Model 363 KT-FUSE $4.00

Face Plate

 The 2" diameter face plate is used to mount a block of wood for turning (into a bowl, for example). The face plate flange is undrilled. You should drill this with three equidistant holes of a suitable size to accommodate small wood screws to secure the face plate to the block of wood to be turned. KT-7301 $9.20

Tool Rest

 for free hand turning KT-11 $28.50

 

Drilling Tailstock Drilling Tailstock sm image

 for use with Models 162/363 (Jacobs chuck to hold drill bit not included, see below) KT-18

$99.95

Jacob's Chucks

 used to hold drill bits with KT-18 Drilling Tailstock
0 - 1/4" Jacob's Chuck KT-1901 $16.50
1/16" - 3/8" Jacob's Chuck KT-2901 $17.10
1/8" - 1/2" Jacob's Chuck KT-3901 $32.30
 

Toll-Free
888-966-3974
info@WoodWriteLtd.com

  

Specials & Closeouts  
 
Copyright by WoodWrite, Ltd. 2002     Created by